Repareer je spullen Gemeenschap Winkel

The first model of iPhone, Model A1203 with 4, 8, or 16 GB capacity and an aluminum back. Repair requires a significant amount of prying, and may require some soldering. This page aims to help users troubleshoot, fix, and seek help for the iPhone 2G.

224 Vragen Bekijk alle

Opties

Touch is not working on half screen - How to fix it?

Hi,

I have iPhone 2G and half of the touch screen is not responding.

I can't even "Slide to unlock"..

My question is:

I'm holding LCD screen of the iPhone 2G.

But I don't understand what is responsiable for the touch? Which part is the touch?

Can you please help me understad how to fix the touch + understand what is this thing called "touch"? Is it a piece of screen? A connector?

This is what I have - And if you can explain what is the 3 parts there, it will be nice :)

http://img577.imageshack.us/img577/9114/...

Thanks

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 1
1 Opmerking

Thanks guys!

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

The 2g has an all in one dispay.... The glass is glued to the digitiser (touch screen) which is glued to the LCD. You can't remove one without damaging the others... Many of us have tried and failed. If the touch no longer works you need to replace the display as one ( usually how it is sold but some people sell just the glass )

Was dit antwoord nuttig?

Ja Nee
Score 3

5 opmerkingen:

+ Shai dont even think about trying to just replace the glass or the digitizer ;-). Like pollytintop says, do it as a combined unit.

door

Thanks guys! I got your reccomendation and I will not try. Can you explaing about "touch" and digitiser in 3GS? can you show me a picture for each one of them? Thank you:)

door

It's the same thing... Just different name by different people

door

Yeah i know it's the same.

But what is this thing actually?

touch/digitiser.. what is it?

All I know is:

LCD

Plastic that protect the LCD

thanks

door

"The digitizer is a thin, clear film over your device's display that tells the device exactly where you have touched the screen. It it made of two layers of film that contain conductive points in them. They are held slightly apart by a thin, non-conductive mesh. When you press against the film, it completes a circuit where you touch and tells the device those coordinates.

Read more: What Is a Touch Screen Digitizer? | eHow.com http://www.ehow.com/about_5408831_touch-...

door

Voeg een opmerking toe

Voeg je antwoord toe

Shai zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 4

Altijd: 5,233