I have a Linea pro flat iron with the pants clip. There's a short in the wire and I have no idea where to get it fixed.
How could I fix one myself. No wires are exposed. I could take a picture
Is dit een goede vraag?
Rep: 685,3k
3,4k
1,1k
2,6k
See if either one of these guides will give you a clue as to how to open it up to check it for burned components. Use a multimeter to test it for continuity to find the problem.
Handleiding
Moeilijkheid:
Eenvoudig
—
10 minutes
Handleiding
Moeilijkheid:
Moeilijk
—
1 - 2 hours
Was dit antwoord nuttig?
Rep: 109
2
hello Sora, if you fix it your self it would be cheaper on you. For a shop to fix you would want to compare cost of product to repair cost. Most likely the short would be at the point of where the wire comes into the main unit being pulled out or to short in wire length overall.
Was dit antwoord nuttig?
Afgelopen 24 uren: 2
Afgelopen 7 dagen: 11
Afgelopen 30 dagen: 27
Altijd: 823
1 Opmerking
I believe it is where the wire connects. It can swivel and I think it's there. It's a old Linea pro leopard print.
door Sora Kururugi