Ga door naar hoofdinhoud

TI-84 Plus calculator support.

38 Vragen Bekijk alle

The Alpha key used to create fraction will not respond when in Y=

The alpha key es not respond when in the Y= ? How do I fix this?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
2 opmerkingen

Hi @agbyrd75

Try to follow this instruction provided below:

My calculator turns on but unresponsive to the keyboard..

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

If your batteries were corroded or the button doesn’t work anywhere, use the My calculator turns on but unresponsive to the keyboard. to diagnose your issue.

However, since your title implies Alpha works everywhere except in the y= page, I’ll have to assume this is a software bug. The easiest way that could fix your issue is to simply turn the calculator off and back on again, then see if it works.

If it doesn’t work, then try a RAM reset. You can do this by [2nd]>[+]>[7]>[1]>[2] or by:

  1. Remove the batteries including the backup battery.
  2. Hold [on] for 10 seconds
  3. Put the batteries back in.

If that still doesn’t work, then it’s time to reinstall the OS. It’s not easy to describe in text how to do this so I’ll refer you to a video tutorial. Make sure you have the latest TI-OS on your computer and the correct connectivity software installed.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

this did not help, I did all of the solutions and the calculator still will not do fractions when clicking alpha/y=enter

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Tonya Byrd zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 5

Afgelopen 7 dagen: 28

Afgelopen 30 dagen: 196

Altijd: 11,278