Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus. Identifiable by the model numbers A1549, A1586, and A1589.

5158 Vragen Bekijk alle

Boot loop caused by broken proximity thing?

Hello

I recently replaced my iPhone 6 screen.

During replacement, I broke my proximity meter thing.

The phone powered up fine, everything was working except for the proximity thing (when I made calls and held the phone up to my face, the screen didn’t turn off like it usually did).

The battery eventually died, and when I tried turning the phone back on, it got stuck in a boot loop. The apple logo seemed to flicker in brightness and sometimes I would get a red screen flash.

Other posts on here suggest disconnecting the cable and then trying to boot the phone up.

I did that, but the phone is still stuck in a boot loop with a red screen flashing sometimes. I also tried disconnecting everything but the home button and the screen itself. Still no luck.

Will installing a new proximity meter flex thing fix my phone?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

De essentiële toolkit

De meest behulpzame tools in onze meest compacte kit.

Koop nu

De essentiële toolkit

De meest behulpzame tools in onze meest compacte kit.

Koop nu

1 Antwoord

Replace the proximity sensor cable. Then do a full restore via iTunes. It’s a hardware issue that caused a software glitch. Also try using the lcd shield from your old screen if you’re not already as aftermarket ones cause problems.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Brink Laubscher zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 3

Altijd: 32