Ga door naar hoofdinhoud

30 amp plasma cutter that can cut up to 3/8in mild steel.

1 Vragen Bekijk alle

Anyone Have a Miller 375 Plasma Cutter Service Manaul

Anyone have a Service / Tech. Manual or Board Schematic For a Miller 375 X-TREME Plasma? Serial Number Range: LG130001P through LG190233P

http://www.stevenrhine.com/?p=3131

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
3 opmerkingen

@contract_pilot I wonder if this board is not bing used in other equipment as well. Do you have any identifier etc. on the board itself?

Rep: 1

door

Just the Miller Name and Part #

door

this article related to miller plasma cutter might be this will help you alot, https://tapweld.com/miller-plasma-cutter...

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

I have the schematics they are located at the link below.. I have them for 2 different versions the the board.. http://www.stevenrhine.com/?p=3131

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Is this what your looking for? https://www.millerwelds.com/files/owners...

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Sorry, No. That is an Owners Manual and Not Even the Right Model. The Service and/or Technical Manual is for the Repair of the Plasma Contains Schematics Etc.

Once Can get the Owners and Parts Manuals Online but once has to be a Service Center or Know Someone to get the The Service and/or Technical Manual until the model is no longer in production.

This policy has now given me a bad taste about miller they used to be so open on service manuals...

door

Voeg een opmerking toe

Voeg je antwoord toe

Steven Rhine zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 29

Altijd: 466