Ga door naar hoofdinhoud

Repair and disassembly guides for Magnavox DVD players.

19 Vragen Bekijk alle

Why my Magnazox dvd recorder looses preprogrammed channels

I have a Magnavox model zc352mw8a dvd recorder 120vac. I can program the channels into it off of an antenna. The channels are there but then I can power the unit off then back on and maintain the programmed channels. But if I power the unit off for a period of a hour or more it looses the channels. They are no batteries in this unit for cmos for it is a cabinet mount player.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Het nuttigste antwoord

These units sometimes use large capacitors (large in value not size) instead of batteries. Open up the unit and look for a cylinder capacitor about the size of a stack of 10 dimes. There should be a value on it of 1 Farad at 5V or something similar. If you find it, replace it with a new one and that should resolve the problem.

Dan

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

rodney zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 3

Altijd: 98