Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

1656 Vragen Bekijk alle

Why is did my phone die and not turn back on?

About 2 years back in 2016 Dec my phone had fallen into water about half a foot deep and was there for about 3 hours... we thought it died and after a month on Jan 2017 we decided to try and plug it in and it started working again and now after 1 year and 1 month Feb 2018 the phone suddenly just died..we tired every software updation rebooting restarting process possible and iTunes won’t pick it up...idk wat to do..

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

1 Antwoord

Gekozen oplossing

Unless the phone was severely dropped just prior to the failure, the phone probably just succumbed to water-related issues. When water gets in a phone, it usually works it's way onto the logic board and often times underneath the IC's, where there are tiny solder balls connecting the IC to the board. As the water evaporates, it leaves behind mineral deposits which can cause shorts. These shorts can make power lines fail (a dead phone for example) or bridge together digital logic signals (think erratic behavior).

At any rate, it's surprising that the phone worked for as long as it did. You could try to have decontaminate the logic board in IPA but it will probably still require some board level troubleshooting and repair.

Was dit antwoord nuttig?

Score 1
Een opmerking toevoegen

Voeg je antwoord toe

Joshua zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 35