Rep: 21
1
2
So I opened up my late 2009 27" Imac to install a new hard drive got everything in good but when I went to plug the v-sync cable back in the metal leads on it would scrunch up. Is there anything I can use to temporarily get the leads to stick to the ribbon so I can get it plugged back in?
Is dit een goede vraag?
Rep: 685,3k
3,4k
1,1k
2,6k
It looks like you need Apple Part # 922-9161 if you have the 3.33 GHz machine. You can do a web search for that number or just go here and get it for $19.00: http://www.applecomponents.com/items/000...
Was dit antwoord nuttig?
Rep: 25
1
I used 2sec glue worked fine for me
Was dit antwoord nuttig?
can you explain exactly how you did this?
you didn't need buy a new v-sync cable ...
you can fix it your self with adhesive tape double sided !!!!
you need a cutter and scissors.....
if you need more help don't hesitate !
it's realy easy and FREE !!!
enjoy ;)
Was dit antwoord nuttig?
simo, why not explain it on here. That way others with the same, or similar problem, can find the answer as well. It's about empowering each other
I agree with oldturkey03 and Diether Busch: I would like to know exactly how you did this. Pictures would be especially helpful.
Could you explain how it works with a taper?
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 2
Afgelopen 30 dagen: 6
Altijd: 5,105
