Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

1656 Vragen Bekijk alle

Touchscreen has bad accuracy after screen replacement

Just replaced the display on my 6s over the weekend and now the accuracy of typing and most other fine tasks on my phone are very inconsistent. No rhyme or reason for it being off by so much that I can find. Is this a normal goof when screwing up the instal or did I just get a bad part?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

1 Antwoord

Gekozen oplossing

It's most likely a bad screen. All of the circuitry for managing the Touch is embedded within the screen.

You should still double check that the screen is properly connected and that there is no debris or damage to the connectors or flexes. Otherwise, contact your supplier about a replacement or refund.

Was dit antwoord nuttig?

Score 3

Commentaar:

I’ll try unplugging it and plugging it back in. Are there often defective parts from ifixit? That’s where I got the screen

door

iFixit has superior parts compared to sources from eBay and Amazon but even the best suppliers will have some defect rate. The difference is a vendor like iFixit will have low single digit defects versus probably 20-30% for bottom of the barrel sources.

Nothing is perfect, the difference is iFixit will stand behind their products and make things right. Contact them at help.ifixit.com.

door

Een opmerking toevoegen

Voeg je antwoord toe

Thorpe williams zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 45