Ga door naar hoofdinhoud

Released October 2012, and has an overall rating of 6.6 out of 10 according to cnet.com.

6 Vragen Bekijk alle

Why does a code is showing and I can not record videos?

When I turn on my camera it displays a code "E:62:10" and I can not record videos.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Hi,

Error E: 62: 10 = Error initializing the lens, the image stabilizer block.

Apparently this is a problem with a lot of Sony cameras.

The lens focusing sensor has a problem because of the lens focusing gears are not working properly .

People have successfully tried give the camera (when it is turned off) a couple a sharp taps with the hand on the battery side of the case and this seems to have resolved it.

Otherwise you could take it to a reputable, professional camera repair service (experienced in Sony repairs) and ask for a quote to repair the camera.

Was dit antwoord nuttig?

Score 3
Voeg een opmerking toe

Hi,  This is indeed a very well known problem with a lot of Sony camera's. Read http://sony-e-62-10.atspace.cc/. A temporary solution could be available at https://www.youtube.com/watch?v=S53D3EfD.... Hope this helps.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

MD Iqbal Hossain zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 21

Altijd: 917