OPGELOST: Hose is getting sucked in and crimped at suction base - Dyson Cinetic Big Ball Animal Upright

Hose is getting sucked in and crimped at suction base

I have a ball animal 2 vacuum. The hose is getting sucked in and crimped at the base. I checked for blockages and did not find any. It's also not sucking up as much as it should. Any suggestions? Thanks in advance.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score 2

Gepost: 22 jan. 2018

Opties

Hi @kristieleigh19 ,

Have you checked that the filter is not clogged up?

Was dit antwoord nuttig?

Ja Nee

Score 1

5 opmerkingen:

I will remove and wash them and see if that works. Thanks!

22 jan. 2018 door Kristie Dilxger

Have you pulled the hose off and make sure you can see light all the way through? Typically if your hose is collapsing, there is a blockage issue somewhere.

22 jan. 2018 door Tony Stockton

Yes and nothing is there.

22 jan. 2018 door Kristie Dilxger

Does the sound of the motor and suction change when you disconnect the hose from down by the ball?

23 jan. 2018 door Tony Stockton

Yes, sound changes. Plz help

29 mrt. 2020 door Alberto

Voeg een opmerking toe

Dyson Cinetic Big Ball Animal Upright

Hose is getting sucked in and crimped at suction base

1 Antwoord

Voeg je antwoord toe