Opties

No volume control- headphones or dock

I can't control the volume output of my 1st gen Touch on firmware 3.3.1.

When I plug headphones in the volume slider doesn't appear, reading around I see this was a pretty common issue when people updated to 3.x so I ran a jailbreak and installed SBSettings and the volume slider widget - it doesn't control the volume, still stays at a constant level.

I plugged into the dock and have the same issue - no control over volume from the iPod.

So although I was initially thinking a headphone jack might need replaced I'm not so sure now that when docked it still has the same issue!

Any ideas?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score -1

1 Opmerking

Just realised you can't control the volume in a dock with the volume slider on any iPod - maybe it is tahat jack needing replaced!

5 feb. 2011 door Neil

Voeg een opmerking toe

Gepost: 8 feb. 2011

Opties

I would definitely start with the headphone jack. It is solder on the logic board and is available here http://www.parts4ipods.com/epages/es1157... and here http://www.ipadpartsshop.com/product_inf... and the instructions for the logic board are here iPod Touch 1st Generation Logic Board Replacement Good Luck to you and let us know what worked. :-)

Was dit antwoord nuttig?

Ja Nee

Score 1

2 opmerkingen:

Replacing the jack indeed did work - I just removed the ribbon and soldered small jumper cables.

10 feb. 2011 door Neil

Congratulations, good job and inventive :-) Thanks for accepting my answer.

10 feb. 2011 door oldturkey03

Voeg een opmerking toe

iPod Touch 1st Generation

No volume control- headphones or dock

1 Antwoord

Voeg je antwoord toe