Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

iPhone 6 with no image after screen replacement

I've been fixing iPhones for a while now with no problem. This time that I fixed it for a friend i replaced it with no problem it turned on and everything and about a week later the phone just went black but it is recognized when I connect it to iTunes. Could it be the logic board that was damaged? The phone has never been wet either.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Voeg een opmerking toe

4 Antwoorden

Gekozen oplossing

Have you checked the connector on the logic board? Check whether it is in good condition and clean it with Alcohol cleaning fluid to have a try.

Was dit antwoord nuttig?

Score 2

2 opmerkingen:

I will try this thank you

door

After trying this multiple times it finally worked

door

Voeg een opmerking toe

Can you verify if it's no image or no backlight? Try shining a light on the screen and see if you can see anything. If so, it could be a problem with your backlight circuit.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

There was light at first looked kind of purple but then just went out

door

Voeg een opmerking toe

This happend to me but on a different phone. The screen is broken talk with your seller

Was dit antwoord nuttig?

Score 0

1 Opmerking:

I thought it might be that too but i tried 3 different screens and one original that just had a crack

door

Voeg een opmerking toe

how you fixed your problem? please tell me, I have same problem

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Alex zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 10

Altijd: 572