Released September 16, 2016. Model 1660, 1778 Available as GSM or CDMA / 32, 128 or 256 GB / Rose gold, gold, silver, black, and jet black.

880 Vragen Bekijk alle

How do you fix the screen crease after replacing the screen?

iPhone 7 was broken and purchased a new LCD screen replacement part online. Before install the screen, I tested the screen and it works normal, but after assembling the screen and turn on the phone, there is a bruise on the screen . Why does this happen and should I pay more attention to some place when install the screen?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

1 Antwoord

Gekozen oplossing

Hi Kaye. Do you mean something like what is shown in this question What is causing screen issue after iPhone 5s battery replacement?

If so, then those are pressure marks. That means something isn't sitting right underneath the screen and it applies pressure against the LCD when you press.

Go back through the screen replacement guide and check to make sure everything is in place.

Was dit antwoord nuttig?

Score 3

Commentaar:

I should add a mark that doesn't go away will likely need a new screen.

door

@danj good point. If the OP gets back to us with more detail (or pictures), we'll be able to tell if the damage is temporary or not.

door

Een opmerking toevoegen

Voeg je antwoord toe

Kaye zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 53