Repareer je spullen Gemeenschap Winkel

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2693 Vragen Bekijk alle

Opties

Screen is black after repair but still on. Help?!

So I was repairing a cracked screen on an iphone6s, but before beginning I forgot to shut off the phone, I did disconnect the battery however. Then once I finished the screen is black and won't turn on with the power buttons. It occasionally flashes the screen for a second but then it goes black again. I am able to answer calls and charge it and it is definitely on but it doesn't show dor nor than the rare second. PLEASE HELP ASAP I NEED TO RETURN THE PHONE BY TOMORROW!

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

I keep extremely good care off which screw goes where so it's definitely not long screw damage.

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

The iPhone 6S is prone to backlight circuit issues when the screen is connected with the battery or power on the device.

Have you tried re-installing your original, cracked screen? If that one works, then you have a bad replacement screen. If the original also has the same problem, then you probably blew the backlight circuit somehow.

Was dit antwoord nuttig?

Ja Nee
Score 3

2 opmerkingen:

What do I do if the backlight circuit is blown

door

A blown backlight circuit requires a micro-soldering repair and is not a DIY fix. You will need to tell your customer that there will be a delay and find a reputable shop to do the repair.

door

Voeg een opmerking toe

Voeg je antwoord toe

Nick Genco zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 73