Rep: 1
1
I have a teac tape recorder a-2050, when power is on , the vu meters lite up and if I activate one of the two micro-switches the motor runs,but if the long bar switch to allow the tape to play, the motor will not run, in the back I can see the relay pull in and thats the only indication that some thing is alive. I have worked on tv and radios with schematics but have nothing for this.
Duane
Is dit een goede vraag?
Rep: 685,3k
3,4k
1,1k
2,6k
Use a multimeter to test the switch. If you plan on keeping the machine consider buying the repair manual for it. I found this one on eBay: http://cgi.ebay.com/TEAC-A-2010-A-2050-A...
Was dit antwoord nuttig?
Rep: 229
4
These run on 4 idler wheels under the front panel that drives the capstan motor. They are probably gummy and deteriorated.
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 2
Afgelopen 30 dagen: 6
Altijd: 703
