Repareer je spullen Gemeenschap Winkel

A1418 / EMC 2833 / Late 2015 / 3.1 GHz Core i5 or 3.3GHz Core i7 Processor. Released October 13, 2015.

96 Vragen Bekijk alle

Opties

The cord joining from the power button to the logic board cut

Dear iFixit community,

I was in the process of upgrading my (iMac 21.5" 4k) and whilst I was removing the speaker (for easier access to SATA cable) the cord joining from the power button to the logic board (which travels along the left speaker) cuted. I was not applying much force and am very surprised that it broke. This means I am now unable to power up my iMac. Is there anything I can do to replace this part or somehow rejoin the wire? Any information would be GREATLY APPRECIATED!! (Even if it is "there is nothing you can do")

Thanks very much!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
1 Opmerking

Please add some images so we can see what you do. Also which exact mode iMac do you have?

(Model number should be on the bottom of the stand.) Adding images to an existing answer

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

If only a 2 wire cable was cut you can repair this the old fashion way: strip the wire at the end an redo the connection, if its to short ad some wire and be sure to isolate every wire at the joints.

Something like

Block Image

If you have a soldering iron just resolder the wires

Something like this

Block Image

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Voeg je antwoord toe

ghmax2010 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 97