The Shark Rocket HV301 is the second installment of vacuums in the 300 series. It is a two-in-one vacuum that comes with several attachments, making it capable of cleaning on different surfaces. Its sleek and lightweight design make it easy to maneuver around any household.

14 Vragen Bekijk alle

Brush Roll Not Turning On

The brush roll will not turn on at all anymore. There seems to be no power getting to it. If I take the stick part off and attach it directly to the canister, it works. Do I need to buy a new stick? Where can I get one?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
Een opmerking toevoegen

Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

Doorblader onze winkel

5 Antwoorden

Gekozen oplossing


It may be that the brush roll drive belt is broken.

Here is a link to the ifixit guide to repair / replace the brush roll. The belt is shown clearly in Step 8 of the guide.

If it is broken then here is a link to suppliers of the part.

Hopefully this is of some help.

Was dit antwoord nuttig?

Score 3
Een opmerking toevoegen

you have a loose wire in the extension handle part.

uplug the vacuum.

open up the handle and repair the torn / broken wire.

be sure to cover with electrical tape.

Was dit antwoord nuttig?

Score 1


Thanks for the answer except it is hard to know where on the handle it should be opened up. Pictures would be nice, but if not at least a good description of exactly where to open up. Thanks!


Een opmerking toevoegen

You probably won't need a replacement part. I would start by checking the connections on the female side of the wand. I believe you will find that one more of the connections will have foriegn matter covering the contact points causing the problem. Please make sure your vacuum is unplugged from the power source before you clean the connections. Your welcome!

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

The Underestimated seems to be right in my case, although, the female connection (on the motor part of mine, rather than the stick) that is the problem, is not cluttered with debris. Rather, it seems to be missing the connection piece altogether. The hole is just empty. Ugh…what to do now…

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

I had the same and I contacted shark and they sent a replacement foot part free of charge.

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Voeg je antwoord toe

Carrie Pandya zal eeuwig dankbaar zijn.

Afgelopen 24 Uren: 58

Afgelopen 7 Dagen: 225

Afgelopen 30 Dagen: 1,384

Altijd: 11,668