Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Not turning on after screen replacement!

Hello guys! I just signed up for iFixit and I'm glad I found you guys. I've been fixing phone's around my area for a while now. This time I replaced an iPhone 6. I went through the operation fine and it turned on. Once on, I noticed that an alert on the screen read that the TouchID was not available (not working).

Naturally, I immediately went back to see if I missed something on the home button. I checked and everything seemed to be looking normal. After that, I put everything back together to check and see if it just messed up on its own, and bang.......The iPhone would not come on.

I tried the normal "hold the home and lock button 30 seconds" and nothing happened. The phone responds to iTunes but that's it.

NEED MAJOR HELP!!!!!

*side note*

I have another iPhone 6 that I used the replacement screen and it works completely fine on it.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

Most like a blown backlight filter if you replugged screen cables while battery connected.

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

If it responds to iTunes try to process a restore and see what happens. Be aware the if device was not backed up the restore would erase to a factory wipe. You will also need the iCloud account to re-activate your device.

Was dit antwoord nuttig?

Score 1

1 Opmerking:

Thank you for the response but I can't get on the phone to allow access for the computer....

door

Voeg een opmerking toe

Voeg je antwoord toe

Reggie Eubanks zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 1

Altijd: 51