Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Change tristar and trigis but cannot detect to computer

Hello i am have problem of iphone 6

That Iphone always restart and cannot be charge. After that i change, ic u2 or tristar and trigis. It can charge batterai now but, after i plug to the computer it cannot detect , itune cannot find .... can anybody help me...

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
1 Opmerking

Check the mail voltage rails for shorts. (PP_VCC_MAIN, PP_BATT_VCC, etc.) does any part of the phone get hot?

door

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

If your device is not recognized by iTunes but works well otherwise, then it is probably an issue with Tristar. You will need to remove it again, check all the pads and surrounding components and install a new one.

Was dit antwoord nuttig?

Score 2

1 Opmerking:

Sorry for commenting on the old reply.

My ipad pro 12.94th gen is showing similar symptoms. It can be charged, but it is not detected by PC at all. (I tried replacing the dock flex cable by disassembling the ipad, but the symptoms didn't change. I used every means such as replacing usb cable/PC.)

Is this also likely to be a problem with USB ic like tristar? (in ipad pro, Probably the CD3217B12 chip is USB ic)

door

Voeg een opmerking toe

Voeg je antwoord toe

bennyw2w3 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 8

Altijd: 200