Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus. Identifiable by the model numbers A1549, A1586, and A1589.

4427 Vragen Bekijk alle

Apple Logo Flashing - iPhone 6 LCD Screen and Digitizer Full Assemblye

Hey Community,

I replaced my broken display and started the iPhone. The apple logo appears for some second and disappears again. Then I have an endless loop of appearing and disappearing...

I had to disconnect the battery to stop it. To check if I had broken something I replaced the new display with the older ones. My iPhone reboots normally again... puh

The support team proposed a iPhone update after the display replacement. Have anybody experience with that issue or with the recommended solution?

I don't want to brick the phone with an update...

Thanks Phil

Update (03/02/2017)

Hey all,

Does anybody else have an idea?

BR

Phil

Update (03/10/2017)

Hey Ben,

without the cable of the camera the phone is normally booting. So I will get a new screen with a new camera. Thx all!

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

4 Antwoorden

Gekozen oplossing

Unplug front camera cable and home button extension cable. If it boots plug one in at a time and find which part is faulty by seeing which cable causes the phone to stop booting.

If it's the home button extension cable transfer the metal plate from the old screen.

If it is the front camera cable then transfer the front camera ribbon cable assembly from the old screen.

Was dit antwoord nuttig?

Score 3

Commentaar:

Hey Ben,

thanks this is a good idea. I will try it tomorrow! :)

door

Een opmerking toevoegen

Hi Phil,

Ensure that all of the connections are connected properly and that there aren't any broken connections. I've seen this issue before with the battery/connection being the issue, so I would check there first.

Was dit antwoord nuttig?

Score 0

Commentaar:

Hi Corey ,

I checked all connections 3 times. At the moment the phone is running well with the older display. So in my opinion there have to be a problem with the ifixit hardware or it is really a software issue with the new hardware. Does anyone know if apple do a hardware check to ensure that all parts are still the same?

So if I understand you right it is unusual to be forced on reinstalling the whole iOS?

door

Well, in my experience I would then think that you're having an issue with something around the connections or the screen itself. In the past, i've seen screws in the wrong place on the board causing this issue and also a defective screen. If you're sure that all of the screws are in the same exact places that they were removed from then I would believe that it's a screen issue. The only way to test is by testing a new screen. Since the old screen works, then that further supports this theory, in my mind that you have a defective screen.

door

Een opmerking toevoegen

Hi.

I have the same problem too. My technician has tried so many things to fix it but none of it succeeded. I don’t even what is actually happening with my iPhone 6. Is anyone here has finally able to fix it?

Regards,

Eve.

Was dit antwoord nuttig?

Score 0

Commentaar:

*I don’t even know.

door

Een opmerking toevoegen

Sounds like a screen issue.

The iPhone 6 will boot fine with only a screen connected so try disconnecting everything and see if it will boot.

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Voeg je antwoord toe

Phil zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 4

Afgelopen 7 Dagen: 16

Afgelopen 30 Dagen: 57

Altijd: 4,613