Repareer je spullen Gemeenschap Winkel

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle

Opties

Just replaced display w/ full assembly but touchscreen doesn't work.

I just installed my new iPhone 6 LCD Screen Digitizer and Full Screen Assembly.The display (and home button I reinstalled) work great on the new screen...but the touchscreen doesn't respond. I checked the connections and everything is snapped in, but the touchscreen is still unresponsive. Is there anything I can do to fix it? I made sure not to damage any connections during the install. Do you think this replacement part is faulty?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0

2 opmerkingen:

I reinstalled my broken screen and the touchscreen works perfectly, so I know that

1.) I connected it correctly

2.) the problem is not with my phone.

This leads me to believe the part sent to me was faulty. Any thoughts?

door

Yep most likely screen faulty if the previous screen had working touch screen.

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Did a little looksie around iFixit and one solution would be to Hold your Home Button and the Power On-Off sleep button for ten or so seconds. That should restore the Touch, Stabilizer, etc.

If not it could be faulty part but I seriously doubt it is. Apple phone parts are built correct the first time.

Here are three URLs that could also be the problem - and or your solution(s).

Touch ID not working after screen replacement?

http://ifixit.org/blog/8309/iphone-6-plu...

http://macworld.co.uk/how-to/iosapps/wha...

Hope this helps.

Shaun

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Sarah Rosborough zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 62