Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

The HP Photosmart Premium All-in-One printer can be used as a printer, copier, scanner. This printer uses a 5 color print system.

26 Vragen Bekijk alle

Rubber paper feed rollers don't roll

My HP Photosmart C309g won't feed paper anymore. After checking with a flashlight, it appears that the rubber paper feed rollers don't roll at all.

Has anyone had the same problem? How did you manage to fix it?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 3


─▒ have the same issue with hp photosmart premium c410b


Does it not move, or does it not grip the paper?


Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

same here... found the fix

Paper feed rollers have stopped feeding paper?

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe
Het nuttigste antwoord

I had this problem. Mine turned out to be a little white plastic gear that cracked and moved out of position. I fixed it by partially disassembling the printer (mostly the outer covers) so I could access the space where the gear was located. I used a slim piece of wood to position the gear back into correct position and then used super glue to repair it. So far it has worked.

The printer cabinet is difficult to get apart. You need to remove almost every screw you can find (#10 torx driver) and carefully unsnap the pieces. Be careful not to tug on the two ribbon cables that lead into the top of the printer. If you ruin these cables you create another problem. I broke them. I know. If you are not mechanically inclined you might as well throw it out. Cost to repair won't be cheap. HP no longer supports the printer with parts or info. Good luck!

Was dit antwoord nuttig?

Score 1


Rather than taking the machine apart, someone else on this site suggested drilling an access hole in the bottom of the printer using a hole saw, Dremel tool, or something. Try to position the hole underneath the white gear, and make the hole big enough to get your fingers in. then reposition the gear and use super glue. Good luck! My printer is still working.


Voeg een opmerking toe

Voeg je antwoord toe

Bruno Scheele zal eeuwig dankbaar zijn.

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 12

Afgelopen 30 dagen: 46

Altijd: 974