Ga door naar hoofdinhoud

The Roomba 650 is a Fourth Generation robotic vacuum released by iRobot in August 2012. This device is hand-free and is programmed to clean our homes. With little manual operation needed, this robot have revolutionized house cleaning.

28 Vragen Bekijk alle

Roomba ignores virtual walls

Roomba 650 ignores virtual wall, but docks OK. I have the VWs that have a two position switch - auto/off.

I have tried new batteries in the VWs and even changed the sensor in the Roomba.

When switched on the VWs blink about every 8 seconds. I have two of them. Could they both be bad?

Update (08/08/2016)

Yes, VW = virtual wall. The VWs that I have do not have a power button that can be pressed down. They are slide switches and have two settings - OFF and AUTO.

I see no other way to reset them.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0

1 Opmerking:

@autolab VWs=virtual walls? When you changed or removed the batteries did you hold down the power button for more than five seconds to reset the wall?

door

Voeg een opmerking toe

1 Antwoord

I have the same problem. I think is a led problem. If you have an other one, please record a video with the phone and look it you see the light of the led.

thanks.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Wes Pike zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 9

Altijd: 1,768