Repareer je spullen Gemeenschap Winkel
Word lid van de reparatiegemeenschap - Account aanmaken

Repair information and guides for the Apple iPhone 5c that was announced on September 10, 2013. Model: A1532, A1456

20 Vragen Bekijk alle | 37 Onderdelen Shop

Opties

Boot loop after screen replacement

I have a friend's iPhone 5c and I changed the screen out for a replacement. I have done this several times on different phones with great results. This time the phone displayed a few lines of [NAND] dialogue, with the message "s_cxt_boot:88 sftl: error, unclean shutdown; adopted 863 spans". I found a blog saying to try replacing the frontcam/sensor flexcable, and the frontcam/sensor connector at the mainboard. I have replaced the first part, but cant find any instructions to do the latter. I have another phone that works, and could simply put the new screen on the other phone, but she has never done any sort of icloud backup and doesn't want to lose her stuff. Can anyone direct me?

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste

Opties

Hi Jessica!

Yep, often error like these behave from an hardware error. This is the guide you need:

iPhone 5c Front-Facing Camera and Sensor Cable Replacement

A test you can do before buy any replacement is to disconnect, in this case, the front camera / sensor flex and without close the phone, try to boot again.

If the problem still continue, try also to disassemble the shield that hold in place the display assemble cables.

Cross my fingers for you..

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

I have replaced the front assembly. I need a guide for changing the connector on the mainboard.

door

Voeg een opmerking toe

Voeg je antwoord toe

Jessica Paradis zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 7

Altijd: 129