Ga door naar hoofdinhoud

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Vragen Bekijk alle
Vraag afgerond

touch Screen working partially why..? (screen has been cracked)

If phone had been cracked left-up side, left touch panel could be partially disactive??

Screen is working well but touch don't working on this position..

Hmm.. Or this problem had occured by Touch Screen Digitizer IC??

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
1 Opmerking

thank you!! i will replace the screen digitizer assambly and test it!

door

Voeg een opmerking toe

2 Antwoorden

Gekozen oplossing

The glass on the front of the iphone has a grid of tiny, almost invisible wires inside that can recognize where you touch them. If the glass is broken, some of those wires could also be broken, not allowing the message that you had touched the screen in a certain area to get to the logic board in the phone.

Replacing the LCD/digitizer assembly should fix the issue.

More info on iPhone digitizers and how they work.

http://electronics.howstuffworks.com/iph...

Was dit antwoord nuttig?

Score 2
Voeg een opmerking toe

The way I understand how a touch screen works, is the glass is electrically conductive which sends a charge signal to the cable attached at the top, behind the ear piece.

Now since you have a crack, I assume the crack goes from edge to edge on the corner of the glass, correct?

If this crack goes all the way through the thickness of the glass, the electrical charge won't be able to travel to the part that's connected to the phone and read your gesture

So the majority of your screen will work, however the smaller area has lost connectivity. Think of it as an island breaking off the mainland.

I hope I've made sense. :3

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 415