Model A1311 / Mid 2011 / 2.5 & 2.7 GHz Core i5 or 2.8 GHz Core i7 Processor

336 Vragen Bekijk alle

Fans Noise, Error: 4SNS/1/C0000008:TS0P--124

Hi.

I Add A SSD, Using: "OWC Internal SSD DIY Kit For All Apple 21.5" iMac 2011 Models w/ Tools", Then My iMac is Very Noise.

Apple Hardware Test Said This Error.

TG Pro Said: ODD 4350 RPM, CPU 4000 RPM.

Please Help me.

Update (04/20/2015)

Thanks A Lot.

This is the result on Temperature Gauge Pro.

Block Image

Update (04/21/2015)

This is My new status:

Block Image

Update (04/21/2015)

This is my (last) new status. Thank you Mayer! And every one!

Block Image

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

4 Antwoorden

Gekozen oplossing

I've had to replace the optical drive fan in several of these. Some of the fans can be fixed by simply pushing on the center of the fan to move it back in place.

Was dit antwoord nuttig?

Score 5

Commentaar:

You said "Hi, i push on the fan and the silence return, thanks, very much. But: On TG Pro: "Fan Diagnostics: These fans appear to be not working properly: Optical Disk Drive (ODD)" What can Do?" First restart the machine and run the diagnostics again. It's Apple part # 922-9120 If you get the same failure use this guide: iMac Intel 21.5" EMC 2428 Optical Drive Fan Replacement

door

will this also work for the iMac Intel 27"

door

Luis, sure it will!

door

Een opmerking toevoegen

JAIME, the problem is most likely related to the sensor of the optical drive fan. Replacing the sensor and/or the fan should resolve this. Try to start under Safe Boot mode. Follow this Apple TN" OS X: What is Safe Boot, Safe Mode?. Download and install this Temperature Gauge Pro. It should help show you what your sensors are telling you.

Was dit antwoord nuttig?

Score 3

Commentaar:

Thanks A Lot. This is the result on Temperature Gauge Pro (below).

door

Boot my miMac on Safe mode and still is noisy.

door

Een opmerking toevoegen

Follow what OT has above

Also did you also get this: OWC In-line Digital Thermal Sensor for iMac 2011 Hard Drive Upgrade. You'll need it if you are swapping the old HD for a SSD drive.

Was dit antwoord nuttig?

Score 3

Commentaar:

Thanks Dan, On what disk i need put this sensor?: HDD (Old Original, WD 500 GB) or SSD (New, Recent Adding: Samsung 850 Pro 256GB).

door

On the hard drive.

door

Een opmerking toevoegen

Boot my iMac on Safe mode and still is noisy.

Dan, on what disk i need put this sensor: HDD (Old Original, WD 500 GB) or SSD (New, Recent Adding: Samsung 850 Pro 256GB).?

Where can buy this fan or Sensor?

Was dit antwoord nuttig?

Score 0

Commentaar:

It appears you have other issuers here.

door

Please tell me.

door

Did you open it and find which fan was making noise and push on the center of them to reseat it?

door

You only need the sensor I pointed you to if you swap out the HD for the SSD. Its a link so click on the blue to learn more about it.

door

Looking at your TG Pro output looks like the HD sensor is working so thats not the issue here. Are you sure you plugged in the sensors back (or correctly) when you disconnected the cables from the logic board to add in the 2nd drive cables?

door

3 commentaren meer tonen

Een opmerking toevoegen

Voeg je antwoord toe

JAIME zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 2

Afgelopen 7 Dagen: 16

Afgelopen 30 Dagen: 48

Altijd: 2,389