Ga door naar hoofdinhoud

Repair information for the Bose QuietComfort 2 acoustic noise-canceling headphones. Released in 2003. Model number: QC2.

24 Vragen Bekijk alle

How do I take the Silver cover off

I have a problem with the right headphone and I suspect a wire issue but I need to take the cover off to be like this picture:

http://hackaday.com/2013/12/07/repairing...

Any help is geatly appreciated

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

1 Antwoord

Sam soud, to get to the wiring, you will have to remove the parts on the inside, not the outside (silver cover) . Check this quick and dirty guide for a similar model. Hope this helps, good luck.

Was dit antwoord nuttig?

Score 0

1 Opmerking:

Thank you for the hint!

I Can cut the wires and replace them from the inside , but it might not work,.

As you can see that the wires extends to the electronic board, I want to reach to the board in order to see if the wires are disconnected ( less likley)

door

Voeg een opmerking toe

Voeg je antwoord toe

Sam Soud zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 7

Altijd: 913