Repareer je spullen Gemeenschap Winkel

Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

426 Vragen Bekijk alle

Opties

Screen digitizer replacement interchangeability

Hi,

I was wondering if the screen digitizer replacement for the ipad mini 1st gen could be used as a replacement for the newer ipad mini Retina, would it work, are the digitizers interchangeable between the two generations? If not, is ifixit going to start selling an ipad mini retina replacement soon?

Thx

Part in question:

iPad Mini (1st Gen/Retina) Front Panel Digitizer Assembly

Product code: IF122-001-1

Apple Part #: 820-3291-A, 820-3291

iPad mini 1/2 Screen Digitizer Afbeelding

Product

iPad mini 1/2 Screen Digitizer

$34.99

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 6
1 Opmerking

Altought I had bad screens with pins inside the connectors which damaged the connector/port on the ipad mini

door

Voeg een opmerking toe

6 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

It is exactly the same! The dual broadcom chips as well as the connector, as well as even Apple's own part number on the IC chip is the same. So yes, you can interchange between the 1st and 2nd gen mini.

Was dit antwoord nuttig?

Ja Nee
Score 8

3 opmerkingen:

just checked my parts and all them are the same on all ipad mini's. the only difference will be the ending letter of the part number, most likely suggesting a different rev type. as if apple updated the design inside the IC but works the exact same. dont take what i say as straight facts. can anyone else better clarify this?

door

Except for one GIANT problem. The connectors for the iPad mini 1 and the iPad mini 2 are on opposite ends of the LCD, therefore they are not interchangeable.

door

Tom - I am not sure what you're even referring to. However, it has been shown that they are compatible. The DIGITIZER on each are interchangeable. The LCD is not. They are two distinctly different parts, LCD and digitizer.

door

Voeg een opmerking toe

Opties

Yes, the digitizer are the same for both iPad Mini models.

Was dit antwoord nuttig?

Ja Nee
Score 3
Voeg een opmerking toe

Opties

Yes, they are the same and compatible. Both the digitizer and IC Chip are the same. Don't worry the models, they are all compatible.

Was dit antwoord nuttig?

Ja Nee
Score 2
Voeg een opmerking toe

Opties

I just tryied to intercharge digitizers between ipad mini and ipad mini retina. Models A1490, A1455. These are not compatible. Each other is not working in other model, but when returned to its original ipad mini, it works. Even home button is non responsive. Connector and dimensions are the same, but it just not work.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe

Opties

I have a newer generation Ipad mini 2, purchased in 2015. Could I use an older model replacement digitized with the button already soldered?

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Opties

Slight expansion of the interchangeability question, I have an Ipad air first gen with cracked glass, any chance that a regular Ipad glass/digitizer would fit on this puppy?

Was dit antwoord nuttig?

Ja Nee
Score 0

1 Opmerking:

IMHO nope. These are different at least in dimensions AFAIK.

door

Voeg een opmerking toe

Voeg je antwoord toe

euricoboal42 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 11

Altijd: 21,435