Ga door naar hoofdinhoud

The RIDGID R84015 X2 is an 18v, 1/2 inch chuck, cordless drill.

6 Vragen Bekijk alle

Battery no longer holds a charge

The 18v batteries for my RIGID tools (drill and reciprocating saw) no longer hold a charge.

The charger even signals that one (I have 2 packs) of the batteries is defective (blinking red & green lights).

Do I have to replace the packs (over $100 each) or can I possibly replace the cells inside the packs?

Thanks in advance,

Paul

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 2
Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

paulk524, you can replace the cells. Take a look on here . Biggest issue will be to open the battery pack. Once you have it opened, the repair will be similar to this Repairing a Cordless Drill Battery or this one Repairing Black and Decker - TS221 Ranger CD2000 Battery Should cost you no more than around $40 to rebuild the battery. Hope this helps, good luck.

Power Drill Afbeelding

Handleiding

Repairing a Cordless Drill Battery

Moeilijkheid:

Gemiddeld

Black and Decker TS221 Ranger CD 2000 Afbeelding

Handleiding

Repairing Black and Decker - TS221 Ranger CD2000 Battery

Moeilijkheid:

Gemiddeld

1 - 2 hours

Was dit antwoord nuttig?

Score 1
Voeg een opmerking toe

Voeg je antwoord toe

paulk524 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 39

Altijd: 16,720