Repareer je spullen Gemeenschap Winkel

Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White. This page aims to help users troubleshoot, fix, and seek help for the iPhone 4.

2375 Vragen Bekijk alle
Vraag afgerond

Opties

Question about reball skywork chip

is there thermal grease between both parts of the chip?

or is it done by cleaning the gold shining surface and reball it?

http://cdn.smartphone-parts.com/images/T...

got the same problem with the chip, it broke into pieces

Skyworks SKY77541 module soldering

in the meantime, the new chip arrived and I will try to solder this

desolder the nonfunctioning chip. there seems to be only solder on the outside. but what about the contact sufaces in the middle?

Block Image

Block Image

Block Image

Block Image

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
3 opmerkingen

Thx for information oldturkey

think my chip is broke into two pieces :(

door

Unusual. Take a couple of images and post them with your original question, lets see:-)

door

okay

I have not reballed already because I'm not sure if the big surfaces are coated with solder or with something else?

has anyone had experience with it already?

door

Voeg een opmerking toe

1 Antwoord

Filteren op:
Meest nuttige Nieuwste Oudste
Het nuttigste antwoord

Opties

There is only one part. Your image shows the front and back of the chip. Here are some great instructions about reballing a BGA. Also check this video, different chip, same idea. The stencils for a reball are available at places like this. Hope this helps, good luck.

Was dit antwoord nuttig?

Ja Nee
Score 1
Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 594