Mattis

Hi, I changed the display assembly from the macbook. After the replacement no image. The trackpad clicks when I power on...

MacBook is not powering on or off with the powerbutton. Tried other keyboard without succes. The strange thing is, when i...

Macbook had coffee spill, cleaned logic board, changed battery and keyboard. Macbook gives signal when connected to...

Macbook pro retina 13" early 2015 suddenly stopped working. Just green and orange light in magsafe, no fan is spinning. I...

I also have a dead MacBook Pro retina early 2015. (not liquid damage) When plug in the MagSafe charger it goes from green...

Hi I'm looking for a product similar as Branson EC for cleaning pcb's with an ultrasonic cleaner. The product Branson EC...

Hallo, voor het ultrasonsich opkuisen van moederborden ben ik opzoek naar een vervangend product voor "Branson EC" (USA)....

Hi, I changed a screen on a white iPhone 7 plus and now the touch id isn't working anymore. The home button works fine....

Hi, This iMac has no backlight anymore. the diagnostic leds are all oké. Is this a broken lcd or is this a logic board...

Hi, My MacBook Pro was having problems. Apple reseller diagnosed a broken logic board €1000. I went to an other store and...

So Guys, no answers to This problem? Logic board related?

Gewoon de volledige front (glas + lcd)

Bad logic board... Take it to repair shop

I have the same problem with an iPhone 6. The person who makes the call get complains about the quality of his outgoing sound. It's like he has something in his mouth while he's talking. Changed the lightning assembly and the dust protectors but still the same result. Does somebody know what causes this problem?

Before the repair, you mean with the original battery? My guess: the replacement battery is a bad one. Try another battery please.

I have noticed that when you assemble the iPhone without the metal that holds the cables in place the screen fits well. When you install the metal the problem appears again.

I know some companies that really change the GPU . My question is where do they buy those new gpu? Or do they get them form a donor logic board?

The diagnostic lights are under the RAM slots. See picture

Hi, my story is a little bit different. When I power my iMac on I hear the HD and Fan spinning for 1 second. Then it stops and does the same thing over and over. 1 LED is steady the second LED lights up when the fan and HD start spinning. See pictures. What could be the problem? If the power supply would be damaged there shouldn't be power, LED or spinning HD and fan right (even when it's just for a second right?)

I think it's not the connector on the logic board but the connector from the lcd. You can try to reconnected the lcd cable. It's under the black clutch.

Please, always disconnect the battery!

So the display assembly with previous models is compatible?

glue does the job …

You're talking about the iPad mini 4

Make sure you disconnect the battery. If not and ipad is still on you can have problems with the LCD backlight. To fix that problem you have to solder