Michael Shaw

55” Phillips Smart TV was damaged when children knocked it over and it landed on its face. Screen flickers pretty bad. Any...

After about a minute display starts blinking. Cannot access self diagnosis feature. I will open it up and have a look at...

Getting no reception on new radio. Is there something I can tweak inside? Cat. No. 1200586

I had the same issue recently and realized I had the wrong cable connected to the charger and phone and as soon as I used the correct cable I got the TurboPower connected message. Also if the phone is over 78% charged the turbo may not display. Let me know how you make out with this issue. Mike

Remove negative battery connection for 30 min. Reconnect, lock doors then unlock doors and start engine.

The Apple iPod mini 4 has the same screen resolution as the iPod mini 1536x2048. Screen size is also identical as both have a 7.9” screen. The only thing ipad mini 4 doesn't have is True Tone. I am not sure if they are interchangeable when it comes to the connection.

Check for a pinched or clogged brake line. Check master cylinder to be sure fluid is flowing from brake line connection.

Here is a youtube video explaining how to change the head gasket. https://youtu.be/9_87WWmlrIU

I didn't find a manual on the subject but I did find a good youtube video. https://www.google.com/search?client=ms-android-verizon&sxsrf=ALeKk01Fc2S73Av_73WJQ2KRDi...-gws-wiz-serp#fpstate=ive&vld=cid:5aedfba2,vid:Wb...

Check out this link to a PDF file of the manual for that tool. https://www.manualsdir.com/manuals/69884...-tool-5262-21.html?page=7

Consider getting what's called an “easy out" kit for small screws. These work very well. Damaged Screw Extractor Kit and Stripped Screw Extractor Set. Its A HassleFree Broken Bolt Extractor and Screw Remover Set Made From H.S.S 4341 With Hardness 63-65hrc. https://www.amazon.com/dp/B07GZ17QD9/ref...

According to the info I found here:https://versus.com/en/samsung-galaxy-s7-vs-samsung-galaxy-s9 Those batteries are the same and should be interchangable.

There may be a pushrod bent or a bent valve or lifter(s) are sticking or the engine may have swallowed a valve.