Hey! My name is Blake /Ba-la-kay/ and I'm a strong independent redhead that don't need no soul.
At iFixit I am known as "The Car Guy" but was actually hired on as the Repair Researcher. What that means is that I do research, all day, every day. And with 7 years experience as an automotive mechanic I am currently looking into bringing more automotive repair content to iFixit!
Outside of work I am an avid audiophile, festival goer, mineral climber, noise maker, electronics tinkerer, fixer/breaker/builder, and a parent to a cat (Zinfandel) and dog (Kaffee).
It’s always a good idea to clean off and replace the thermal paste if the heat sink is removed.
Updated! Thanks!
This is a video embedded guide and can be watched here on iFixit or on YouTube.
The only tool needed is a 2.5mm hex key.
If coolant is leaking out and there’s overheating that means you have a leak somewhere. It would be best to take it to a mechanic to diagnose.
Hi Zac, it’s not possible to accurately diagnose a leak over the internet. It would be best to have someone, or a mechanic, to physically look at it to locate the leak.
This Chromebook likely uses a dual chip which can be seen in step 10. I’m guessing the chip is a 802.11AC 2x2 MIMO WLAN + Bluetooth 4.0 from looking at the specs.
Some can, however, automotive rubber is made to withstand the types of oil/grease used in the repair seen.
The main reason for the brake light to be still on is that there is air in the system. Properly bleeding it should correct the issue.
@akoayplip it looks like he is turning on the headlights to test out the passenger side replacement.
Pagina 1 van 2
Volgende