Babak

Bro if u can open the iMac the rest is easy just disassemble it totally, then remove the flash drive and HDD hard disc. put a normal 2.5mm SSD instead of HDD then put back everything into the iMac and close the door. start the iMac by holding command + R ..... the rest u know how to do it

Hey Sam I came across this post today and I believe this is not an iMac 2020 model more looking like a 2019 model. as you may know the 2020 model doesn’t come with the HDD at all they have only SSD soldered on the board

you are already in the website buy the best quality tools from ifixit.com

with the ssd it should work same as the fusion drive check what is wrong with the bootcamp, you may need to update the bootcamp. but in case your want to go back it is possible to make it same as before. there is a video in youtube look at it and create your fusion drive accordingly. link is: https://www.youtube.com/watch?v=c7ZYwLl8...

Sorry to hear that Ahmad I think the prying tool you used was a little longer than what it was suppose to be and u damaged the screen flat cables. Try to push the flat cables at the top of ur screen see any improvement. Apart from LVDS there is another cable for backlight going to the screen see if that connector is correctly connected. Sometimes they get disconnected internally from their cable. I did have a case like that

Frnk nothing u need else than a fast SSD thats it. If you want u can watch my utube vid an see all by urself . Good luck

Yes Evelyn easily and make ur iMac faster

Thanks a lot Dan

I don’t know how to put a thumbs up for definition of PRO for Grant Spedding & John Ward. Good jobs

Is this “Apple T2 APL1027 339S00536 coprocessor “ there to protect boards from 3rd party and unauthorized repairs?

In apple website if you see there are 3 different speeds 2133. 2400.2666 in the iMac 21’

https://www.apple.com/shop/buy-mac/imac