Hi Craig You could try and reset your laptop by draining the power, by removing your battery and pressing the power button for 20-30 times and on the last keep it in for a minute or longer. Do not put the battery back in and reboot. Take the power supply and plug it in and then start it up without battery. it could work for the display, I am just not sure of the keyboard. Good luck and please advise if it has improved? Mckenzie
Hi Nicole Have you tried to use a usb wireless dongle and try? it could be that your internal network card could be faulty, or a dry joint contact on the board. Regards Mckenzie
Hi Jim You could try an remove the logic board from your Blaze watch lay it isopropal Alcohol for a while and let it dry completely over night. I have had luck doing this and have done a few. McKenzie
Hi Maggie Before making that decision first lift you doc feeder cover and you can clean the rollers with a damp cloth or some isoprop and the same when you remove your paper tray do them as well. all the best
Hi Was the screen tested before you fit it on your phone and have you inspected your connectors before replacing it, also try software as well. I also received a faulty screen from a supplier but after I rechecked my connectors there was a few pins bent and not making proper contact.
