Deze gebruiker heeft hun profiel nog niet ingevuld.
Mijn Handleidingen
Mijn wiki's
Vragen
I have three identical 61 key Behringer UMX midi controllers that I used to build a home digital organ and the first one I...
Meer informatieI bought this very effective but cheap (inexpensive) USB insect zapper. It suddenly failed. I have an identical one and...
Meer informatieI need a pair of each of these gears but cannot source them. Can anyone help me source these gears? I found a S. American...
Meer informatieI need to replace the power supply board of a small LED TV. Can anyone help me find where to get it or perhaps an equivalent?
Meer informatieI have a universal adapter fitted with 2 USB ports. It has suddenly failed. LED light will not come on and both USB ports...
Meer informatieAntwoorden
I re-soldered the two ends of that resistor (across the capacitor). The left solder seemed rather deficient. Hey Presto! It is working! Now the proof is in the zapping! I confirm it is back doing what it's supposed to do. Lesson learnt: don't always blame cheap components blowing out; the fix may be as simple as resoldering (as for dry joints).
Meer informatieAnother thing I discovered is that the DVD that is included inside this TV is dead. Cables all in place. It is not that important as long as the TV works.... but.... knowing that the repair is not complete does irk me somewhat. I sprayed some silicon on the plastic gears. This had no effect.
Meer informatieI bought that alternative power supply. It had all the right voltages written on the reverse that tallied with the original. Got the TV to work. Thanks to you for guiding me along the way. I am a happy bunny!!!
Meer informatieNo clicks.... at least not that I can hear.
Meer informatieCan be more explicit, please? I am checking with 2 sellers on eBay re: PW120506. The two I found are not new. How did you come to this part number?
Meer informatieI took a closer look at the board. The pins are actually labelled! The two pins (white base): 250V N - L (power in I assume) The two orange connector pins are as follows: (1) smaller one: 12mm - 6 pins: 12V - 12V - on/off - ADJ - GND - GND (2) longer one: 25mm - 12 pins: 5V - 5V - 5V - GND - GND - GND - 12V - 12V - ON/OFF - ADJ - GND - GND
Meer informatieIf the power supply does not work, how can I gather that info? I dismantled the TV quite a while ago whilst trying to find a new board which I have not yet been successful in doing. I'll have to dig it back out if I know I can be guided towards a potentially successful repair. I do have a variable power source 3-24 volts. Can I use this to establish at what voltage the mainboard powers up?
Meer informatiePlug works as a normal adapter. It's just the USB ports that are dead. The other: I already replaced the capacitors: no change; and a resistor..... no change
Meer informatie