Deze gebruiker heeft hun profiel nog niet ingevuld.
Antwoorden
Another tip - remove the nozzle from your hot air solder station too. Yes, temp needs to be high, but also when removing a HDMI port, the surface area the hotel air is covering needs to be larger - removing the nozzle will help spread the heat.
Meer informatieSounds like it could be a PSU issue (when it shuts off, what game are you playing etc?). It is hard to tell the exact cause, but you can read the UART error codes by using a UART reader if you have a soldering iron to hand? Here is a guide - https://consoletherapy.com/support/how-to-repair-a-faulty-ps5-with-uart/
Meer informatieThere are lots on eBay, but you can get a genuine replacement from here - https://consoletherapy.com/store/officia...-playstation-5-internal-expansion-slot-cover/
Meer informatieUnfortunately, CE-108255-1 errors are the start of something more serious with your PS5. Rebuilding the database/cache might help, but a full fix will require either replacing the SSD, or SSD controller. Have a watch here - https://www.youtube.com/watch?v=0sopRWoc...
Meer informatieUnfortunately, this is a far too common issue with the PS5. If you have attempted all of the usual fixes (unplugging from wall socket, leaving for 10 mins, tried another wall socket) then I am afraid the problem is likely to be a faulty PSU or a blown capacitor on the motherboard - have a watch here https://www.youtube.com/watch?v=dLrWrZV1...
Meer informatieCommentaar Gids
No - the USB board is not married to the motherboard. You can use a USB board from any PS5 and it will work. Be careful that you buy the correct replacement though as there are two versions of the USB board.
The original PS5 (pre 2021 models) use the same size board for both Digital and Blu-ray consoles, so yes, the board will fit both models (the eject button will be redundant on a Digital Edition) - they are available here: https://consoletherapy.com/playstation-5...
If you are in the UK, they are sold here:
James H
@jamesh3748
37
Reputatie
5
Oplossingen
0
Handleidingen
Lid sinds 07/04/23