Hi Jose, I think you are right about diagnosis. On this X-T10 it was on the motherboard. It can be that it was soldered on, it has been long time, cannot remember the model of the battery and exactly the place om the motherboard, but when you take it out it is obvious, and you can see small text on battery to order the same type online 😊

Hi, I think I researched what each letter means, and ordered those:

https://www.aliexpress.com/item/40004126...

https://www.aliexpress.com/item/40008129...

But did not have any luck repairing the board.
Please post about what worked or not for you :)

Hi Juri,

Personally I am not a complete beginner, but was not able to identify which is a broken part.

Ended up replacing the motherboard and in the meantime made this manual.

If you feel comfortable in soldering and have patience for microscopic things try to watch some youtube videos about SMD soldering, motherobard repairs, broken fuse and capacitors identification.

You will also likely to need hot air station, as parts are really microscopic, and regular soldering iron will be too large.

Spare fuses can be found for example in DigiKey, or AliExpress.

Best of luck! and please share your experience if you manage to fix it!
I may be able to fix my old board too and make new tutorial as this seems common issue with this camera.

Hi, I would try going to your closest camera repair shop and ask if they have something like this.
Otherwise use calipers and try searching online, but thats going to take forever.

OK, I see… It does look strange.

I will keep it in mind to do a more detailed top part dissassembly guide so you could separate that part. But since I am just a hobbyist myself I can’t give you an answer when I will find time for it :)

Hope you understand :)

This is a lovely camera and enjoy it while it works, luckily it is not something that stops it from working :)

Hi, could you share an image of exactly which piece is broken and you want to change? As I am looking at my X-T10 it does not have the usual big rubber eyecap that you can see in X-T2, DSLRs or similar cameras :)

It is unnecessary to remove the speaker wires.

Also to have access to top panel, it is enough to remove only the top set of wires.

This and the previous step are not required for dissassembly of the camera

This and the next step not required for dissassembly of the camera.