alex

Hi. I got a costumer that has an iPhone 11. The phone came in for a charging port replacement since it wouldn´t charge....

Hi. Got a customer that changed the screen on his iPad by him self. The replacement went approximately ok, but the iPad...

Hi. Does anyone know how to disassemble the physical volume and power buttons (not the flex cable) on the iPhone X?

Hi. Have seen other answers on power jumpers on macbook, but haven´t found one for the Air 2015 mod. Do anyone knows if...

Hi. I think that the keyboard on macbook pro 13" mid 2010 is the same for all modells from 2009 to 2015, but I need it...

A customer ask me how to get out from recovery mode on a Samsung S6. I´m not that in to Andriod and Samsung, so I´ll ask...

I replaced the battery in a mid 2012 macbook pro. When I plug the magsafe in there is no color on it, but the two fans...

This is an updated from this question: Buy new Fusion drive I've bought the Firecuda 1TB SSHD and cloned the Fusion Drive....

Hi. Is there posible to buy Apple’s fusion drive or any other fusion drive anywhere? Update (01/20/2018): Mac mini late 2014

Hi. I´m wondering if the iPhone 7 and iPhone 8 has identical earpiece speaker. Can I use the earpiece speaker from an...

I figured this it out :)

Check if the back camera is attached properly, and that is not making your screen protrude.

Have set the time and date? Should be done automatically if the phone is connected to WiFi Don't know if this fix your problem but it's a solution for the known "searching" problem :p -Alex

Hi. The left over part is the small black ground clip on the upper screw of the battery connector. The picture show you where to put it :) You can see it on step 5 in the "iPhone 4S Battery Replacement"-guide Just slide it underneath the batteryclip For the error 4013: Put the left over part back in right place ;) Check the dock connector. Is it connected to the logic board correct? If all seems fine, you could try to restore thru DFU-mode. Check this guide: http://thebigboss.org/guides-iphone-ipod-ipad/dfu-mode

Hi. If the picture on Ebay is correct, it seems like you just have to swap the logic board...? iPhone 5 Logic Board Replacement Follow that to step 30

Hi. What website is it? Is it is a flash based web site?

Try to set the date and time manually. Then restart the phone :) Or just try to connect to WiFi, and take out the sim tray and put it back in :)

Check if this cable is connected properly:

Hi. Power button, volume buttons and the silent switch have the same connector. Check it here: If it´s connected properly you can check if there is any damage to cable. Let me know what you find out :) -Alex

Hi. You could try ti replace it. You can buy the part here: iPhone 4S Headphone Jack & Volume Control Cable Here is a guide how to fix it/replace it: iPhone 4S Headphone Jack Cable Replacement You can also turn on "AssistiveTouch" Tap Settings > General > Accessibility > AssistiveTouch. More info about AssistiveTouch: Apple support