Everytime I charge my band, the screen will randomly freeze and restart when I touch it when charging. What do I do? I...

I have an elentra with about 15k miles and the transmission is making a grinding noise at 5000 rpm in 3rd gear. It was...

What adapter do I need for this cable? It is a clip on microphone and it isn't working with my audio Jack's on my laptops.

So my JBL Flip 5 keeps smoking after one hour of music. I turn it off for at least 10 minutes, then when I try to turn it...

So I have a TI-83 Plus calculator that is using a SilverLink Cable and it will not work with TI Connect. Every time I...

Hello! I recently got an iPod nano (2nd gen) and I needed to restore it. Every time I restore, I hear an ejecting noise...

Hi Manoj, If a hard drive is not detected by your pc, it could be possible that the cables to the hard drive could be damaged. If this is not the case, there is a chance that the hard drive has failed due to age or due to an electric discharge, which could cause the drive not to be recognized. I hope this helps. Sincerely, Duck

Hi there Prabwati, If your laptop cannot open due to an automatic repair problem, you may need to get another copy of a windows installation media. The simple way to do this is if you have another laptop and a USB drive that is at least 8GB of storage, you can download the windows installation media creation tool for: Windows 11: https://www.microsoft.com/software-download/windows11 Windows 10: https://www.microsoft.com/en-us/software-download/windows10 And follow the steps on the software. After this, you will need to boot into the USB with the copy of Windows on it and wait for it to start. After you do this, you will need to press "Repair your computer" and follow the instructions. I hope this helps. Sincerely, Duck

Hi Skip, The only way to remove retail mode on your pixel is to send it to Google to remove the password or to ask Best Buy to remove it. You can probably try some paid third-party software to try and remove it, but it may not work. With regards, -Duck

Hi there Anurag, Yes, there is a way to safely destroy all data from the phone. Firstly, shut down the phone. Secondly, hold down the volume up button and power button at the same time. When the logo appears, keep holding the volume button and let go of the power button. Thirdly, use the volume up and down arrows to navigate the screen. Press Wipe data/factory reset. Then press yes. Once you have done that, restart the phone and it is good as new with all the data being safely destroyed.

Hi there Tracey, So it seems like you need to reset the T.V. in general. You can do to settings and do so. If there is none, try unplugging the T.V. for 30 seconds to 1 minute, then plug back in. If it still doesn't work, try finding a reset button on the back of the T.V. Hope this helps. With regards, Duck

Hi Ricci, Have you checked out the inside by opening it? Try checking the wireless charging cable and see if you forgot to plug it back in. If that isn't the case, it could be three things. The first thing is that the coil could be damaged. Unplug the battery then gently remove the coil and inspect for damage. If there is damage, you can buy a wireless coil for cheap. If there is no damage, it could be a possible battery problem. Try unplugging the battery cable and plug it back in. If that doesn't work, it could be a possible board issue. If the old battery was removed with some power left in it, there is a chance that there could be a chance that the battery shorted the wireless coil or parts around the coil that makes it possible to charge. I hope this finds you well. With regards, -Duc

Hi Ronwilliams, This solution may sound insane, but trust me on this. Try TAPPING the bezel of the T.V. where the screen is dim with a hammer. TAP THE HAMMER, NO HARD-HITTING!!! With regards, -Duck.

Hi Nes'et, Yes, I would recommend taking this iPhone to get checked out, but not by Apple because they can charge an insane amount to get this fixed. This might be fixed by a battery, or could be a logic board that got fried. (Shame on you for using metal tweezers) You could try opening it again (NOT WITH METAL TWEEZERS) and trying to find any signs of burn. If possible you could try to replace the battery and turn it on again, but be careful because it might short when you remove the battery.

Hi Matthias, This problem most of the time means that the battery and/or screen has either been damaged or has unmatching voltage. Or another reason is that you could have damaged the proximity sensor. If the proximity sensor has been damaged. the screen may flicker or turn off. You can try unplugging and replugging the sensor, or replacing it. There are many tutorials online to help with the replacement of the sensor. I hope this finds you well. With Regards, -ziamaxim

Hi Crazy Pierrot, I have never heard of this issue, but I am willing to give some tips. (1) You could try restoring your iPhone through iTunes (2) If you dropped your phone for long periods of time, water could have seeped into the screen and/or logic board and damaged the compenents. (3) If your phone is not working with any series of button combinations, I suggest you try and plug the phone in first, then do combonations. I hope this will find you well -With regards, ziamaxim