Now it's my 3rd time using this guild to tear down the PS5. Greatly appreciate the time & effort that went to in making this guide... It's the gift that keeps on giving!

This was my second time tearing down the PS5 to clean it... and it was still a very annoying process.

It was made much easier with this guide, though. Thanks for all the work you put in to making it! Much appreciated.

Thanks for this guide. It really helped out and drastically sped up the whole process.

I needed to install a 2.5" SSD and new RAM to my girlfriend's machine and have never opened up a HP laptop.

Appreciate all the effort that went in to this!

It’s the Tessa tape sold here.

I bought this Switch Lite with a broken LCD to repair and sell, so the screen was already blown out, but I had the same issue. The LCD was still connected to the digitizer and it actually peeled the LCD apart. As I said earlier, the LCD was already broke so it wasn’t a big issue, but I would of been fairly angry if it hadn’t of been.

Do not attempt to disconnect the plug by pulling on the wires! If you rip out the wires, you’re gonna have a very bad day. Wiggle the plug using the plastic on the male end of the connector while pulling out.

Just because I feel like this needs to be stated clearly, “Do no attempt to pull the plug out by the wires!”

Pull from the plastic, male end of the plug or you’re going to end up have a very bad day.

Thanks for putting this up. I was wondering how different it was going to be, compared to tearing down the Pro.

My model of 2DS(2017?) is definitely laid out a little differently than pictured. Be careful not to miss any of the tiny ribbon cables at the bottom.

The motherboard of my 2017(I think) 2DS is definitely laid out differently than in this guide, be careful.