Deze gebruiker heeft hun profiel nog niet ingevuld.
Vragen
Hi. I have this iPod 6th 8gb that works good, but digitizer stop responding at a times, sometimes works good others when...
Meer informatiei have this iPhone 3GS 5.1.1 Factory Unlocked, everything works great, Good Service, Good WI-FI, Good Charge, but the...
Meer informatiei would like to know what kind of glue apple uses to keep the digitizer screen to the frame, i know uses 3M adhesive...
Meer informatieHello, i have an iPhone 4 iOS 5.1.1 BB 04.12.01 not jailbroken or anything, fresh update and restore to newest firmware i...
Meer informatieHi I have like 30 used iphone 3g batteries that i have replaced fom old iPhones, i wondering if i can get some use for...
Meer informatieHi. i have a very weird issue on a iPone 3G, phone was dead when i received so i installed a new well charged battery,...
Meer informatieHi i use to buy and sell iphones, many of them came whit no accesories at all, so i used to buy those fake chinese wall...
Meer informatieAntwoorden
Do you have a jailbroken iphone? If do so you have have a tethered jailbreak and might need to use redsn0w to boot tethered now option. Theres a new tool to untethered jailbreak the iOS 5.1.1 its very easy and works on the 3gs whit no problems, and eliminate the need to connect tue iphone to the computer on every reboot.
Meer informatieSOLVED ! it was a faulty screen, replaced and its working great again.
Meer informatieI had this problem before, somethimes iphone go directly to Recovery Mlde when turned on, first thing to try whit the previuos/old battery to see if restore completes. If no, it may be unlocked before and its on 06.15 baseband thats why error 3914, so may use redsnOw pwoned dfu mode and restore whit a custom firmware, 4.1 always work, when working you can upgrade to latest firmware.
Meer informatiewhat i did is i pushed the screen upwards to make a small gap at the bottom and slide a one-side razor then pry it open, just try to avoid damage to the screen gasket.
Meer informatiemay be a loose connection on #3 connector, this one turns the lcd backlight off when on a call and its the earspeaker. sometimes get loose or misaligned on the reassambly process, open again and check.
Meer informatieIt must be the digitizer went bad, sadly its kind of expensive around $70 for an OEM lcd and digitizer assembly as they come as one unit. Theres a guide how to replace the display assembly on a original iPhone and lots of videos on youtube.
Meer informatieIt may need a hard reset, just pless power and home buttons to power off then power on again, it happened to me when change lcds whit the iPhone powered on.
Meer informatieYou will need the power button flex replaced, and the part on the step 23 is the power button holder/braket it should be still attached to the old flex that you replaced. Search for iphone 4 power button flex
Meer informatieDo you check dock connector flex? May got damaged when disconnected. Dock comes whit speakers a mic for memos, do they work?
Meer informatieIt happened to me on a 3gs that wont work if the bightness level was half or brigther on settings. Try un low bright level if cables seem ok.
Meer informatiePagina 1 van 2