Steven Hanlon

Can you confirm that when the screen is off, the digitizer detects your fingers and works fine? What kit are you repairing with? Maybe the glass is not OEM or something? I just did a note 3 the other day with the LOCA glue and it was fine, I just used a little too much and the ear speaker is muffled, so I'm going to take mine apart today and try to clean that out. I used 'smart kit diy' from ebay for like $25.

I just installed a Seagate Momentus XT 500GB Hybrid SSD in this iMac (20") I used Intel's OEM 3.5 to 2.5 adapter, getting it to mount properly with the sata data/power cables was a little challenging but I eventually got it. I put the thermal sensor on the HDD as well, experienced no problems with fan speeds.

It's because the standard Seagate drives contain a proprietary thermal sensor. you will have to purchase HDD Fan Control to get it to stop. It's the only solution short of shorting out the thermal sensors (dangerous).

Install the trial and you'll see.

http://www.hddfancontrol.com/

Great guide. I was able to remove the components without any trouble. Be sure to label your screws, as there are so many.

You can install a Seagate Momentus XT 500GB Hybrid SSD in this iMac without issues.

https://plus.google.com/u/0/108374099338...