| 3.150 | Reputatie |
| 5 | Oplossingen |
| 2 | Handleidingen |
| Lid sinds 08-09-11 | |
We fix all types of devices from laptops to tablets and...
| Gebeurtenis | Telling | Delta |
|---|---|---|
| Iemand heeft jouw handleiding afgewerkt | 207 | 2216 |
| Iemand vond jouw gids leuk | 56 | 453 |
| Bericht met een link naar jouw handleiding positief beoordeeld | 37 | 252 |
| Post is positief beoordeeld | 11 | 132 |
| De admin heeft jouw handleiding goedgekeurd | 1 | 100 |
| Gecontroleerde wijziging aan de handleiding geaccepteerd | 2 | 2 |
| Beoordeelde een post negatief | 3 | -6 |
You can find them on eBay.
I have never tried using a hairdryer. Only use a warm setting; don't use the highest setting or you might start melting it. It is stuck by a low-tack adhesive.
Tesa 4965, Tesa 61395 or Hi-bond VHB tape.
What temp and time did you use? face up or down?
The 64 Bit Driver Kit should have all the bits you need.
Mako Driver Kit - 64 Precision Bits
All A1278, A1286 and A1297 macbooks have replaceable keyboards.
The instructions seem clear to me. I think you might of missed step 32; thats why you damaged the digitizer FPC connector.
Hi
Answers:
Q1. You can remove the upper display assembly from the top case, then you can place the top case flat on your work surface.
2) buy a screw extractor set.
Hope this helps.
Where are you?
As far I can tell the QWERTZ (DE) and QWERTY (UK) keyboards have the same physical layout and and the keyboard connector is in the same place.
Pagina 1 van 2
Volgende