Network Engineer in the NYC area. I like routers, firewalls, comic books and black metal. When I am not working, I am repairing of broken things while trying not to break them some more and soldering stuff together in the hopes that it works. Just attended my second Maker Faire. Looking to get into Arduino. Would like to build my own space balloon one day.
Wifi Antenna Install
iPhone 4 Cellular Antenna
iPhone 4 GSM screen replacement.
iPhone 4 Display Assembly
Lower Antenna Flex Wire and Button ConnectorI have had much difficulty getting the lower antenna flex wire plugged back in to the mother board. Can I solder it on?...
How do I can get the antenna button connector back in place?After replacing the screen in the iPhone 4 I have become stuck as to getting the button connector for the antenna back in...
Antwoord op "Advice to store screws for Display replacement"I use a screw tray like this one. I cut up some paper and label each compartment as I remove the screws from the device I am working on. Having a tray with a lid is a good idea as if you take a break from the repair you can snap the lid down knowing that if it is disturbed or knocked over the hardware will at least stay inside the tray. Good luck.
Antwoord op "Black screen and beeps will not boot up"Here you can find a list of iMac Beep codes which should help you figure our where to start in diagnosing your issues. http://www.techbase.iofm.net/tips/applem....