Deze gebruiker heeft hun profiel nog niet ingevuld.
Vragen
Hello! I have a Samsung galaxy a-10e here that got drowned in a pool. It dried out, and I took out the boards, scrubbed...
Meer informatieHello! I was wondering if you could test a 7 screen on a 7 plus, because I need to test a 7 screen but I don’t have a 7 to...
Meer informatieHello. So my friend dropped his Samsung galaxy a10e in water and when making calls his microphone doesn’t work and when...
Meer informatieHello I have an iPhone 7 Plus that recently got a little wet and then it went to boot loop and when I try to restore it...
Meer informatieHello. I have an iPhone 5 and when I try to restore it, it shows error 2009. Is there a way to get past that
Meer informatieHello. I am fixing a iPhone 6 and I am wondering if you can test out an iPhone 6 with an iPhone 7 dock connector.
Meer informatieHello I have a iPhone 7 that was in a lake for a month and a half and I was wondering if 91% isopropyl alcohol would work...
Meer informatieHello I was wondering if it would be a good idea to build a iPhone 8. I found a housing with all the small parts with the...
Meer informatie(1) So I dropped my iPhone 7 in a lake for a month in a half and I found it in the lake, so I opened it up and put it in...
Meer informatieAntwoorden
So it’s the same screen? If it’s an aftermarket screen, it may be an error. If not try checking if the pins on either of the screen or the phone are damaged.
Meer informatieAbout the home button. Sadly the home button won’t work because it is a non physical button, and when you replace it you won’t get Touch ID or functionality back. About the WiFi. Maybe there is a dead spot in your screen that touch won’t work or I am wrong. Maybe a bad WiFi antenna. Hope this helps. Cheers
Meer informatieHello. Is it in a boot loop?
Meer informatieHello. Unfortunately you are going to have to replace the lcd because there is no way to get the ink out. Hope this helped. Cheers
Meer informatieYou damaged the lcd cables.
Meer informatieYou might of damaged the connector to the logic board during the fall
Meer informatieThere would be a model number like a1500 on the back look it up and you will see
Meer informatieSometimes you just have to press and hold the power button and volume button and the loop disease is a board related fix so you would have to get it fixed by professionals
Meer informatieI think the power button needs to be replaced if it may be putting to much pressure on the button
Meer informatieIt is probrally just because of the brand
Meer informatiePagina 1 van 3
Commentaar Gids
Maybe one of the pins on the connector on the board are broken? That would be my guess
Noah
@apple_fixnoah
251
Reputatie
27
Oplossingen
0
Handleidingen
Lid sinds 10/21/19
Stemmen
11
0