Mark D Schlossman

My phone has no service does searching for signal tried other sims still an issue did a factory reset I wasnt signed into...

I have an iPhone 7 working home button replacement I do not care about touch id but sick of the message popping up every...

(1) IT WORKS (2) I have a customer with a iPhone XR we did battery replacement but she upgrade to iOS 13 making any...

I know a battery replacement will give my customers phone a service error msg but it was working fine until she updated...

iPhone 6s new battery and charging port will not turn on with battery charging port is only pulling .44 amps consistantly...

Hold Command+ R on startup this brings you to recovery mode. Click the top right apple logo go to startup disk see if you can see your hard drive if its not there your hard drive has failed but you may be able to repair it in disk utilities. Go to Disk Utilities Click your hard drive then try to first aid the hard drive. If it doesn’t work for you might need to reinstall the OS it will not remove files if you do it properly reply to my answer and I can help you thru the steps you will need another computer

If you unplug external Monitor does it work? Reseating ram can help with display issue sometimes but if it works on external it may well be that your LCD is broken or shorting out.

30 mins to an hour clamp that screen down but try not to flex digi and put pressure on lcd

Charger port might need replacement The home button could be effected or if you have another screen to try it on to see if old screen isnt completely broken test it on the old

Audio circuit blown causing screen to go black then not working I'd try new

Remove cmos battery and leave it out for at least 3hrs place it back in should reset your bios

OEM Parts only work get them on mobiledefenders.com

Just start unscrewing make a repair guide I

Replacement screen try again

On recover page click top left to check start up disc if it see hard drive you will need to load os Sierra on it boot to flash reload your os to fix

Most likely you may have damaged the flex of proximity sensor.

Check connector

Check placement with flash light make sure everything is aligned correctly