Brayden S

Im going to config.txt to do a very low overclock to boost my gpu freq by 20-30mhz but i cant find the code line to enter...

I’m trying to play raze 2 on my raspberry pi 3b+ so im trying to overclock the core speed but every time I go to raspi...

my ti 84 ce plus is randomly restarting and when it turns on it says ram cleared. I remember once opening the battery...

my multimeter isn’t giving accurate readings , i remember once hooking up a rechargeable lithium ion battery to my...

My grandmother’s phone is glitching weirdly like the apps on the phone screen sometimes out of nowhere flinch or move for...

I own a fujifilm instant mini 8 I installed new batteries today but when I activate it , it won’t shoot and there is a...

I was moving the tray that the disk and hard drive are in ( elite was on) because the front cover was blocking the disk...

Recently I have been wanting to get the mobility radeon hd 4330 motherboard for my laptop I think it was 512mb of graphics...

I have a latitude e6400, Ive been wanting to upgrade it for a while, so im wondering can I put a i2 quad into this laptop?

I have an Inspiron 1545, It has a kinked heat sink, but it still seems operational, and when i’m using Youtube , or at...

yes, it is possible, I own one of these laptops too and it works

if you have a soldering iron and the port is just loose, just solder it back together, however if it is damaged you will have to buy the port off of ebay or someplace like that f you think if you have the skills to repair it. however if you dont, i advise you bring it in to a repair shop

Update your phone and see if it stops if not, reset your phone.

you can, but you may need a new phone case(not external) or a new caamera

the battery was loose it wasnt pushing against the battery connections enough, so i put i tiny amout of fabric in there and now it works

check on the battery ribbon cables and conectors

take out the speaker on the board, if you know how to solder

Ive had this before, your going to need to get an apple certified screen 3rd party isnt always great, that, or you didnt install the connections right

you may need to order a rotor replacement for the drone, look at the manual for details where to get one

Either the phone is a fake, or you have a battery problem, your going to need to get a new battery or get a new phone