Zander Castillon

So i was thinking to upgrade my i3 3110m to a i7 3540m. i know that its socketed but can i use it?

So, i recently replaced a digitizer not from ifixit. and it worked for a few seconds but stopped working completley after...

So my power adaptor broke 3 months ago so i took another charger and took the magsafe connector and connect it together....

So, i found this Lexar Usb Drive in a road somewhere, i took it and tried to format it i tried formatting the actual drive...

Hello, I recently dropped my phone into the ground. The screen poped off and turns on but spases out couple of days later...

Hello ifixit Community! I have a hp elitebook after updating this VPN the WiFi doesn't work. I re downloaded the...

So, I found this mouse in a goodwill for 4 bucks.I noticed that it doesent have a reciver but a micro usb in the mouse. I...

So i got a Hard Drive with Windows 10 installed on it. i replace my hard drive with the windows one in my macbook.it boots...

!Yes it would work and you only need to unbolt some screws and change the face plate Follow the guide! Xbox One Wireless Controller Model 1708 Cover Plate Replacement

Hello Mahfuz your phone may be unsupported for 5ghz wifi

I had this problem but push the magsafe connector to the port and wiggle it around works good to me

Ok Wipe the drive reinstall Mac OS sierra Hope it works!

No You dont Your welcome

Ok its a passive subwoofer Your Welcome.

Hi! Yes it does! though its a different antena it fits!. But only one small problem. if you use a antena that is lock with sprint it wouldnt work. Hope This Helps!

Hi! You dont need to replace the lcd just the digitizer unless if theres black and white lines.

I can suspect one thing in here the WiFi. because other appliances like the modem or even the microwave, YES THE MICROWAVE.or the surrounding Neighours Wifi. have a band. ex. if your printer is spitting out 2.5 Ghz band WiFi while neighbours have a 2.5 Ghz band i causes of what its called.internet traffic.the network band in this senario is overloaded in the 2.5 ghz so take it easy and connect to a 5 ghz wifi (so as your printer) to solve the chaos Hope it works

Bună! puteți cumpăra o placă de bază online pe ebay sau o listă part out Sper că acest lucru vă ajută!